The huge RCA 77A is on right...the very first model. On the left is the 77D or DX...the last models in the series. Both mikes are mounted on the beautiful art deco RCA desk stand designed for these mikes. (Stan Coutant microphone website” coutant.org an excellent source for mike info)
The 77B was the smallest in the series...it was unidirectional only like the 77A. Used stronger magnetic material that made the smaller size possible. An amazing difference from the first to second 77 models. (Coutant)
77B1-- This is the model 77B1 [a modification of the 77B]...more of these were built than the 77B. A very popular mike from middle to late 1930s. (Coutant)
The 77C came out in 1940 and was slightly longer than the “B” model because a switch was included to give a selection of three patterns. The rotary switch is at the bottom and had a graphic for each pattern which was lined up with an arrow to select unidirectional, nondirectional or bidirectional. (Coutant)
A change was made in the 77C1 pattern switch. Instead of the rotary graphic switch a screwdriver switch was located on the bottom of the mike to select the three pickup patterns. (Coutant)
The 77C1 showing the pattern selection switch on the bottom of the shell. This mike had a large Cannon “P” connector attached to the body...CBS added this modification to some of their RCA ribbon mikes to allow the cord to be disconnected right at the mike. (Coutant)
77D—Here is my own RCA 77D which was retired from KHSL-TV in the 1980s. This was the mike used on the main TV studio overhead boom going back to the sign-on of the station in 1953! The 77D model came out in 1947 and replaced the model 77C1. (Gary Avey)
77D-back-- 77D showing the back of the screen and the revised pattern selector switch...a mechanical shutter that allowed six different patterns...RCA called it a “polydirectional” mike. (Coutant)
77d-eq-sw--This is the bottom of the 77D showing the bass rolloff equalization switch. M=music; V1=voice; V2=an even steeper reduction in bass response. (Coutant)
77DX-umber-TV-- RCA offered a “TV gray” painted model especially for on-camera TV use. The shiny chrome on the regular model 77DX could reflect a shiny spot in the cameras eye!
Judy Garland 77A-- The Hollywood Canteen in WWII starring Judy Garland singing for the troops into an RCA 77A. (U of Maryland)
Roberta Peters--Here's opera star Roberta Peters rehearsing for the NBC TV show “The Firestone Hour” in the 1950s. The overhead boom features an RCA 77D mike. These TV booms had a special rubber band suspension for the mike so that noise would not be picked up when the boom was moved to follow the talent on stage. (U of Maryland)
WCAU Philly-- A radio talk show on Philadelphia's WCAU using several 77D mikes. (U of Maryland)
WFILTV boom-- This is from the 1951 RCA broadcast equipment catalog showing the WFIL-TV studio and a local live show with a 77D on the boom. The mike boom operator stood on a platform on the boom so he could move the boom to follow the talent...he also could “gun” the mike itself on the end of the boom to face the “live” side of the unidirectional mike toward the talent.
Here's me in the Navy in the early 60s at Subic Bay, Philippines Naval Base when I worked at the local Armed Forces Radio station. An RCA 77D mike with a Gates console, Gates turntables, Ampex tape machine. (Gary Avey)
Gary-KHSL-1968-- Mr. Microphone again at KHSL in Chico about 1968 in our new production studio when the radio and TV station were together in the same building since 1953. (Gary Avey)
KCBH-FM studio in Hollywood in the 1950s. They used a G.E. Console, RCA model 70 turntables, a Magnecorder and Ampex tape machines, as well as an RCA 77D mike. This was one of the first “Hi-Fi” FM stations in the LA market owned by Crawford's of Beverly Hills...a music store.
In my mind there are about three microphone designs that most people would recognize as iconic. The RCA 44, which we covered in the first of this series, the RCA 77 and the Shure Unidyne model 55. This session we will take a look at the RCA 77 series of ribbon mikes...starting with the very first model...the 77A.
Dr. Harry Olson was RCA Labs expert audio designer. Dr. Olson was responsible for developing the ribbon microphone as discussed in Mr. Microphone articles 1 and 2. The basic ribbon mike has a bi-directional pick up pattern...that is it picks up sound from front and back and relatively “dead” to sound arriving from the sides. On May 1, 1931 Dr. Olson delivered a paper entitled “A Unidirectional Ribbon Microphone” at the meeting of the Acoustical Society of America in Cleveland, Ohio. The unidirectional microphone, as described in this abstract, consisted of the combination of velocity and pressure ribbon microphones which produced a heart shaped, or “cardioid” directional pattern. Simply stated...the mike picks up sounds from the front side and rejects sound from the rear.
This microphone was commercialized in late 1933 as the RCA 77A Unidirectional Microphone. The microphone was an instant success. The RCA 77A was followed by the RCA 77B, 77C, 77D and finally the 77DX. The 77A was a huge mike which had a rounded top and a flat bottom. The 77B and the following models were much reduced in size due to stronger magnetic material available at the time. All of the 77 models used a rubber shock-absorber in the stand mounting connector.
The internal workings of the mike consisted of a straight bi-directional ribbon unit in series with a pressure ribbon unit (omnidirectional). In the straight ribbon mike the ribbon is open to the atmosphere on both sides resulting in a bi-directional pickup. The pressure ribbon mike is achieved by leaving the front of the ribbon open to the atmosphere but closing off the rear side of the ribbon by a tube connected to an acoustical space within the mike body that is filled with sound absorbing material.
This results in the non-directional or omnidirectional pattern. Connect the output of the two-mikes-in- one in series and the geometric result is the unidirectional pick up pattern.
The first two mikes in the series, the 77A and 77B, had a fixed unidirectional pattern. The 77C gave the three basic patterns: unidirectional, bidirectional and omnidirectional selected by a screwdriver switch on the bottom of the mike which electrically selected the mike elements singly or in combination for the uni pattern. All three of these mikes used a double ribbon element.
The last two models in this series...the 77D and 77DX were called “polydirectional” due to a more effective means to adjust the pickup pattern. A screwdriver adjustment on the back of the upper screened part of these mikes let you choose unidirectional, bidirectional, omnidirectional and also three additional variations of the unidirectional pattern. This selection was not electrical but by a shutter mechanism that was mounted in back of the ribbon element.
The shutter adjusted a single ribbon in relation to the acoustic tube and damping system to achieve the variable patterns. This gave great versatility to these instruments for the audio engineer depending on the type of sound pickup problem encountered. There was another screwdriver switch on the very bottom of the mike body that selected low frequency or “bass” equalization. This allowed the mike to be used for close-talking without a “muddy” or “boomy” effect for a cleaner sound transmission. All ribbon mikes tend to emphasize the bass when used close up.
This was a huge revolution in mike design and made is possible to overcome many microphone sound pick up problems like imperfect acoustics causing too much reverberation and noise in rooms and studios. It also a great help in public address systems by reducing the tendency to “feed back” or “howl”. In TV production the RCA 77 with it's broad front side pickup pattern was perfect for overhead boom use...it rejected studio noises from the back of the mike like camera and other background noises.
In radio and TV the RCA 77 series...especially the later models, 77D and 77DX, were very popular. RCA had a beautifully designed art-deco style table stand for these mikes. They were also used on Floor stands in radio and TV studios. If you watch the reruns of the old Lawrence Welk TV shows from the '50s you'll notice that ABC used the RCA 77D mikes...usually two in front of the sax section and two more in back to pick up the trumpets and trombones. Later in the '60s ABC audio engineers changed to the Electro-Voice model 666 cardioid dynamics for the Welk orchestra pickup.
The 77D and DX series units were used on TV overhead mike booms in the days when TV producers tried their best to hide the microphones whenever possible! The 77 was a popular radio control room mike, too...usually hanging from a fixed or flexible boom. In my previous Mr. Microphone article on turntables, you'll notice the photo of me in the KYOS, Merced control room with an RCA 77D. KYOS also had an RCA 77C model from the early 40s. I visited the old KTUR, Turlock studios just after they had changed call letters to KCEY in the early 60s and I saw more than one RCA 77D mike in their studio and control room. KBEE, Modesto was another station that used the RCA 77 as well as KRJC, the Modesto Jr. College station, as you can see in some of the photos on this web site for those stations. Other stations in the area including KSTN, Stockton used the 77 as well as TV stations KCRA and KOVR back in the day.
I worked in Chico most of my career in broadcasting at KHSL-AM and KHSL-TV. Both these stations used the RCA 77D mikes. The TV station had one on their main studio boom as well as in the announce booth. KHSL radio used this type mike in the master control room as well as in the production studio for many years clear up into the 80s.
Remembering back to the “golden age” of TV...all three major networks used the RCA 77D and DX models in all phases of production. NBC was owned by RCA back in that time and they would only use RCA mikes and other equipment made by RCA. The long succession of Tonight Show hosts had an RCA 77DX on the desk for years even to the early years of Johnny Carson. Of course Larry King on CNN has one on his desk...even though it is probably only a prop. Also David Letterman used to use a 77DX on his desk on the Late Show on CBS.
If you search “RCA microphones” on Ebay you often see several 77s up for auction...and they fetch up into the one thousand dollar and more range! There are several ribbon mike repair experts who will install a new ribbon in these old mikes and make them like new again. One of these guys used to work for RCA and has the original equipment used to repair these mikes. The old RCA company ceased operations back in the 1980s...the RCA name is still around on consumer electronics...but nothing is made in the USA like it was back in the glory days!
The RCA 77 series of ribbon microphones had an incredible impact on the audio industry and even today, in this digital age, are in demand by recording studios for their versatility as well as their smooth wide range sound quality.